Nicks workshop mutterings

Various railway orientated modelling projects in my new workshop/railway room.

Archive for the category “Pendon”

Cowleaze farm- stone walls

I have made a start on the stone walling which encloses the garden and orchard.
The base is 2 thicknesses of card one of which fits into a slot in the foundations of the scenery.

20140716-161729-58649790.jpg
The stones along the top are made from strips of mounting board chopped into small pieces and stuck into PVA. The whole lot is then covered with filler mixed with a small amount of PVA. This helps it stick to the card and also harden enough to be scribed. When dry the stone courses are scribed into the plaster with a sharp metal scriber.

20140716-162950-59390842.jpg
The stones are now painted with watercolour. I used charcoal grey, Chinese White, raw sienna and raw umber in varying amounts to get the colours.
Windsor and Newton no longer seem to do a charcoal grey but neutral tint is the nearest match.

20140716-163422-59662797.jpg

Cowleaze Farm

A new project I have taken on is to install the buildings and complete the surrounding scenery for the Cowleaze Farm tray for Pendon. This farm sits towards the back of the ‘Vale’ scene and the hole where the tray will be installed can be seen in the photo below.

2014-05-06 at 12-13-20

The buildings were all built some years ago and need fitting to their cellar bases and detailing around added. This will include the surface of the stable yard, gardens, an orchard and stone walling to surround the site.

In the next picture the main farmhouse building is in it’s base along with the garage and cart shed. The empty bases will take the stables and pigsties. The basic card for the stone walls is taking shape and a start has been made on colouring the bleached carpet felt to represent the grass.

2014-07-01 at 15-28-22

Plenty more to do!

Lilac Cottage-finished

After 2 years work on and off I have now finished my model of Lilac Cottage in the village of Bishopstone in the Vale of the White Horse. Hopefully it will meet the criteria for Pendon Museum and be part of the village scene. It is mounted in it’s own cellar base ready to be put in the scene.

Now I can get on with my other projects!…….

DSC_1883

DSC_1882

DSC_1881

Lilac Cottage- Thatching

I have now reached the interesting stage with Lilac Cottage, thatching the roof..

I am doing this with plumber’s hemp as described by Chris Pilton in his book on cottage building for Pendon, which I can thoroughly recommend.

Below shows the cottage with one aspect thatched and trimmed and a second elevation waiting to be trimmed. Once all this has been done then the ridges will have to be done as well as the various bits of detailing. Eventually the whole building will be weathered.

DSC_1874DSC_1875

one thing i have noticed, for anyone who has had a house re-thatched, model thatch seems to produce as much mess as the real thing if not more scale for scale!

Lilac Cottage update

It is taking a long time but at last I am managing to move forward the cottage I am building for Pendon museum.

All the brickwork and stone work has been embossed and painted, the windows have been put in and the shell has been folded up from the flat parts. It now sits in it’s own cellar base which will be used when the model is eventually set into the scene.

DSC_1864

DSC_1865

DSC_1866

The upper floors have been put in place. The box like structure that can be seen in some views is the light box to take internal lighting to two of the upstairs rooms.

The next step is to make the chimneys, again from embossed brickwork and then start to build up the profile of the roof ready for thatch to be laid.

Lilac Cottage progress

Well Christmas is over so it is back to modelling. I have finished marking out the main walls for the cottage and have done all the embossing for the brickwork and the chalk stones. I have also painted the brickwork and now need to start on the stonework. Some of the stones along the base are quite rough and these have been scribed into filler mixed with PVA glue applied to the card.

20130104-180135.jpg

Lilac Cottage

I have made a number of models for Pendon Museum over the years starting with the test piece one hole privy and working up to full blown cottages, the last being a pair of farmworkers cottages for Cowleaze Farm. I have now taken on the construction of lilac cottage which is my first attempt at a thatched one.

lilac cottage2

I was presented with a selection of photographs taken in the 1950’s and a set of sketches with basic measurements done by the late Roye England. These are not to scale and some of the measurements are estimated and some of the important ones are non-existent! Below is an example of one of the sheets;

lilac cottage1

From these drawings and the photos the first stage is to set out on card the dimensions of the walls and windows. Dimensions that are not known can be worked out from the photos by counting bricks knowing what the size of a normal brick is! Some bits have to be estimated by trial and error.

I have now worked out all the dimensions and have started on the fun of embossing the brickwork and scribing the chalk stonework ready for painting.

Post Navigation

North Devon Clay

Launceston & District MRC

Inspired by Brent

Modelling the Great Western Railway in 1947

Ouse Valley Modeller

Ouse Valley Modeller is a blog about my 4mm OO gauge modelling, my observations mostly about Sussex railways in the 1950's and my layout Herstmonceux

The Model Railways of Oly Turner and Chris Matthews

Finescale (ish) Modelling in 4mm Scale by two friends

highland miscellany

MODELLING MUSINGS ON PORTCHULLIN, GLENMUTCHKIN AND ANYTHING ELSE THAT TAKES MY FANCY

Kyle of Sutherland

A record of my P4 layout Kyle of Sutherland, which I scrapped in 2018, and the continuing work to upgrade and improve its finescale trains, locos and rolling stock